> ## Documentation Index > Fetch the complete documentation index at: https://help.cloudtalk.io/llms.txt > Use this file to discover all available pages before exploring further. # Using SIP devices with CloudTalk > How to set up an SIP device in your dashboard > [!NOTE] > > In this article you will learn how to set up a SIP device with CloudTalk, including how to find your SIP credentials and connect your device. **User level**: Admin *** > [!WARNING] > > **⚠️ Important: SIP activation required before setup** SIP device support is not enabled by default. You must contact [CloudTalk Support](https://support.cloudtalk.io/hc/en-us/requests/new?ticket_form_id=26305535257884) **at least 24 hours before** you plan to set up a SIP device to request activation for your account. Without this step, SIP credentials will not appear in your Dashboard and setup cannot proceed. SIP (Session Initiation Protocol) is a subset of VoIP (Voice over Internet Protocol). You can use a variety of SIP "hard phones" (hardware-based) or soft phones (software-based) with CloudTalk. Basically, any device or application capable of working with SIP can be integrated with CloudTalk. CloudTalk's SIP device feature is for SIP phones and softphones registered directly within CloudTalk, such as MicroSIP, Linphone, CSipSimple, Zoiper, or Cisco IP phones. **CloudTalk is not a SIP trunking provider.** This means: * CloudTalk phone numbers cannot be used as SIP endpoints for external AI voice platforms (such as Retell AI or similar services hosted outside CloudTalk). * There is no number-level or trunk-level SIP integration for third-party voice or AI platforms. If you want to run AI voice agents on your CloudTalk numbers, the supported option is [CloudTalk VoiceAgents](https://help.cloudtalk.io/en/articles/11053795-getting-started-with-voiceagents.md), a native AI voice agent solution that connects directly to your CloudTalk numbers and call flows without any external SIP integration. ## Where to Find SIP Login Details 1. In the CloudTalk Dashboard, navigate to **Users**. 2. Since credentials are agent-specific, select the user whose credentials you want to configure for the SIP device, and click **Edit Profile**. ![](https://mintcdn.com/cloudtalk/iz8SL1-6a3Qpskmu/images/help-center/articles/5361606/df9d77b0b649-user-sip.png?fit=max\&auto=format\&n=iz8SL1-6a3Qpskmu\&q=85\&s=c6468d08a1b18eeb5c407e84827fb70a) 3. Go to the **SIP Login Details** tab, where you can find the agent's SIP credentials needed to set up your SIP connection. ![](https://mintcdn.com/cloudtalk/iz8SL1-6a3Qpskmu/images/help-center/articles/5361606/9e4b2fa1ad8c-sipcreds.png?fit=max\&auto=format\&n=iz8SL1-6a3Qpskmu\&q=85\&s=e73803817969907d24fc03461b077a89) Though we don't have specified guides for every SIP provider, we do have resources for [MicroSIP](https://help.cloudtalk.io/en/articles/5373619-how-to-set-up-microsip.md), [Linphone](https://help.cloudtalk.io/en/articles/5373573-how-to-set-up-linphone-with-cloudtalk.md), [CSipSimple](https://help.cloudtalk.io/en/articles/5373598-how-to-use-csipsimple-with-cloudtalk.md), [CiscoIPPhone](https://help.cloudtalk.io/en/articles/5408616-how-to-set-up-a-cisco-ip-phone.md), and [Zoiper](https://help.cloudtalk.io/en/articles/5361548-how-to-set-up-zoiper.md). Usually, you will enter the **Username** credentials from CloudTalk in the format `@` and the phone will then set up the configuration automatically. As no authentication proxy is used with CloudTalk, you won't need further info beyond what is provided. *** ## Troubleshooting ### Outbound calls fail with a "Not acceptable here" or "Not allowed" error This error (SIP 606) typically indicates a media negotiation mismatch between your SIP phone and CloudTalk's server. The most common cause is **SRTP (RTP Encryption) being enabled or set to "Optional"** on the device — CloudTalk does not use SRTP, so any attempt to negotiate an encrypted media path will cause outbound calls to fail, even if inbound calls continue to work fine. **To fix this, disable SRTP on your phone:** 1. Open your phone's web interface or on-device settings menu. 2. Navigate to **Account** > **Advanced** > **RTP Encryption (SRTP)** (the exact path varies by manufacturer and model). 3. Set the value to **Disabled** and save the change. 4. Reboot the phone if prompted, then test an outbound call. If the issue persists after disabling SRTP, please reach out via our [Support portal](https://support.cloudtalk.io/hc/en-us/requests/new?ticket_form_id=26305535257884) and include the phone model, the exact error message displayed, and the approximate date and time of the failed call attempt. *** *Need help or have a question?* Just reach out through our [Support portal](https://support.cloudtalk.io/hc/en-us/requests/new?ticket_form_id=26305535257884) — we're here for you. ## Related topics - [Automatic Call Pick-Up](https://help.cloudtalk.io/en/articles/15250862-automatic-call-pick-up.md) - [Getting Started with CloudTalk guide](https://help.cloudtalk.io/en/articles/10558672-getting-started-with-cloudtalk-guide.md) - [How to Use CSipSimple with CloudTalk](https://help.cloudtalk.io/en/articles/5373598-how-to-use-csipsimple-with-cloudtalk.md) This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.